How do you make columns with your own hands

How do you make columns with your own hands?

A quality acoustic system is everyone's dreamlover of music. Unfortunately, it is not always possible to buy it in a store. But do not despair: the speakers with their own hands make it quite possible for everyone!

speakers with their own handsWhat you need to work

Surely every radio amateur in stockthere are several old speakers that can be adapted to the case. For the case, you can take a conventional fiberboard, but if you belong to aesthetes, it's better to use a tree.

Material preparation

If you have ever dealt withwood-fiber plates, then you know perfectly well that in the long-term state, their end parts are often cracks. These places must be cut off. From the surface of the plates you need to carefully remove all traces of contamination.

Markup

Since there are so many opinions about how,what size should be the column, you can easily cut the pieces of the size you need with your own hands. We make holes for the dynamics in advance, using ordinary pencils for this.

The material must be "cut" by a hacksaw orcircular saw with the smallest teeth, avoiding chipping and unevenness in the places of the saw. In addition, it is better to immediately mark out the places for screwing screws. For their seats, it is required to make holes with a thin drill, and for the hat to remove the chamfer with a thicker tool. So you will protect yourself from splitting the material.

speaker stands for yourselfOn the back wall, do not forget to make a hole for the wire outlet.

Assembly

The more beautiful the speakers will be with their own hands, thanmore accurately you will collect them. Screws try to screw it neatly, avoiding any distortions and getting them out of the material. Having assembled a three-sided "box", resembling the shape of the letter "P", carefully check it for the absence of cracks and cracks.

If any, they can be smeared whenhelp the sawdust from the same fiberboard mixed with the PVA glue. Doing the speakers with your own hands, do not forget to cut the hole for the speaker. Do this with the help of a jigsaw, and trying to perform this operation as accurately as possible!

After that, you can attach the speaker. You can use glue for this purpose, but for this you need to choose the most reliable composition. If you are not sure, it is better to screw them on small screws.

Amplifier

quality amplifier with your own handsThe question of the amplifier used is difficult to disclose,not knowing your preferences and possibilities. You can buy some finished model, and you can build it yourself, using the same TDA1558Q scheme as the basis. It is good in that it turns out a fairly high-quality amplifier, with its own hands made and giving out 22 watts per channel. For domestic use, this will be quite enough.

Appearance

Of course, your work (especially whenlack of experience) may not look very attractive, but everything can be corrected by appropriate design. Here there are several options: to cover with a cloth, paint or veneer. We recommend using the last option, gluing the tree to the glue.

To protect and decorate the speakers it is better to use some kind of mesh material. You can also make columns for your speakers. For installation, the most commonly used is dyed metal.

Related news

  • How to give birth quickly
  • How to cook sea bass
  • How to make an Iron Man suit
  • Correct installation of the software
  • Embroidery on knitted products: technology implementation seams
  • How do you make columns with your own hands How do you make columns with your own hands How do you make columns with your own hands How do you make columns with your own hands How do you make columns with your own hands How do you make columns with your own hands How do you make columns with your own hands How do you make columns with your own hands How do you make columns with your own hands How do you make columns with your own hands