How to remove the alarm?
Want to learn how to remove (remove completely, but notdisable) the signaling from the machine with your own hands, then read the information about it. In fact, it's easy. Very annoying is the sound of the alarm system which is carried to the whole district. How to prevent it?
Advices for experienced drivers: how to remove the alarm system
How to remove the alarm? The advice of experienced drivers on how to clear the alarm is based on the following information: it is necessary to find where the alarm unit is installed. If found, it's almost 90% of what you turn off the alarm in your pocket. When the alarm is activated, the lock normally works. The lock is of two kinds. Built-in and external lockout relay. What is the built-in alarm system?
The built-in alarm is when from the blockseveral wires come out, which differ in width from other wires. They are usually blue or black. That's just necessary to pick up two wires and connect them together.
What should I do with an external lock? With external interlocking it is better to find the relay and put a jumper between the contacts. Contacts can be numbered 30 and 87 or 87a. If the relay is difficult to find, you can do the following: connect the control wire of the lock to ground. The color of the wire depends on the signal system.
How to remove the alarm from the car
It is necessary to open the door with a key, switch onignition and press the button responsible for the alarm. She must be disconnected. But, it is required to press the button not once, but several (it is possible five times). If you disconnect the connector from the central alarm unit, this will help to disable the alarm itself. In a very extreme case, it is necessary to cut off the power supply on the alarm unit. The power unit is under the left foot in the cabin.